Pneumatic Brake Pump Adjusting Tool – lesteren

• MAKE BRAKE JOBS EASY: Use the ABN Brake Compressor on left or right hand thread brake system wheel cylinder piston brake calipers (wind back calipers and some push back single piston calipers) with the 1/4-inch air hose adapter to simplify brake jobs; Choose an adapter . connect your existing shop air line . press pressure button and rotating lever to wind back brake piston . press release button . and pull rotating lever to move push piston axle backwards for dismounting tool caliper.
• BRAKE CALIPER PISTON TOOL:Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers; Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads; Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation; It is suggested to lubricate between uses.
• FITS YOUR VEHICLE:Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads;Use as a single piston caliper tool . a dual piston caliper tool . a quad piston caliper tool . and a rear brake caliper tool;This versatile caliper piston compressor tool is ideal for cars . trucks . and some commercial vehicles;Works on both fixed and floating calipers.
• RATCHETING ACTION:Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates; Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components; Reverse tool movement to retract compression plates by flipping the switch on the handle.

• EASILY RESET YOUR BRAKE CALIPERS AND PISTONS:Drain fluid from calipers using approved brake pressure relief procedure then remove the caliper and worn brake pads from your rotor assembly; Retract brake caliper press plates to fit inside the caliper cavity; Begin ratcheting slowly and steadily until the pistons have retracted completely; Retract compression plates to remove the disc brake piston tool from the caliper cavity.
• BUILT TO LAST:Constructed of carbon steel . the ratcheting screw and pad plates are designed for maximum strength and durability; Thick 7.8-inch (19.8 cm) steel handle features plastic shell for comfort and efficiency; Brake piston spreader set includes (2) 4-5/8 by 2-3/8 inch (10.2 by 5.1 cm) plates and (2) 7 by 2-3/8 inch (17.8 by 5.1 cm) rotating plates; Larger plates are held in place with built-in magnets for easy attachment and removal.

Specifications:

• Color: blue.
• Size:25 x 17.2 x 12 cm.
• Material:High quality carbon steel

PackageInclude:

• 1 xPneumatic Brake Pump Adjusting Tool.

Notes:

• Due to the different monitor and light effect . the actual color of the item might be slightly different from the color showed on the pictures.